The silicone mold for the pillar candle Snake with formwork of our own production is made of silicone of European quality.

The mold is made of flexible silicone, which allows you to easily remove the finished candle from the mold. It has one notch for better access.

The mold is sold complete with formwork. To make the filling, open the formwork and place it on the table. Insert a mold with a stretched wick into it so that the cut is in contact with the place of closing the formwork, put on rubber bands. Thus, the formwork will press the mold so that the wax does not leak out.

Dimensions of the finished product:

- the weight of the finished candle is 45 g;
- height 220 mm;
- the diameter of the leg is from 18 mm to 22 mm
- the diameter of the tip is 10 mm