The ATRIBUT.MOLD workshop will help you turn your conceived idea into a silicone mold for plaster, concrete, wax and soap as part of the "Custom order" service.

We usually receive requests for personal molds in direct instagram @atribut.mold and in the Telegram chat @atribut_mold. You can send us your idea, sketch, photo from the Internet, hand drawing and any other example of the product, as well as specify the dimensions that the product should have when leaving the mold. The manager accepts your request and starts a discussion with you. If your final product has a classic look, such as cylindrical or cubic planters, the manager will immediately tell you the approximate cost of the project.

Our cases:


The production cost consists of two parts: the creation of a master model for pouring and the silicone mold.

The cost of making a master model is paid once and depends on the size and complexity of the form. We also have certain limitations on the plane of 3D printing and the complexity of the master model.

 

The process of creating individual forms goes through several stages:

Discussion in the chat with the manager of all the details of the order: the shape of the finished product, the dimensions.

Electronic modeling (creating an electronic prototype)
We model all shapes and models that are not complex, such as a cube, cylinder, oval, rectangle, absolutely free of charge. We apply the client's logo if available and necessary. We show a realistic 3D visualizer of the finished product and make a miscalculation.

If the model is a figure, which we cannot model ourselves, then a professional 3D artist joins the modeling. We ask him in advance the cost of simulating a complex model and pass the information on to the client. If all conditions and cost are suitable for the client and he agrees, we transfer this project to the designer for modeling. As a result, you will receive an electronic model of any complexity, or with a stone texture, patterns, ornaments, and sculpting elements.

After the designer made an electronic simulation of the model and it was approved by the customer, we calculate the exact cost of the entire project. If everything suits the client, we proceed to the next step - 3D printing.

All prototypes are created only with the help of high-precision printing, our photopolymer printers produce the most clear detailing, contours, details, elements, logos. No printing of prototypes with classic printers that apply plastic layer by layer, and the lines are difficult to polish 100% qualitatively. On such printers, we print only additional parts for pouring and formwork.

After 3D printing, we show you the intermediate result in photo/video format. Next, the prototype gets into the hands of our master grinder, who will bring it to an ideal state under pouring with silicone: he will process the model, make it perfectly smooth.

Next, the ready-made prototype and printed parts go to the stage of filling with silicone. Our master pourer selects the filling density for your future mold and gets to work. Solidification of the form takes place within 16-20 hours.

When the silicone mold is ready, we shoot a video for each client as a report of the completed work, where we again show the finished prototype, on which the mold was poured and the finished mold itself.

The next step is sending. We ask the client if he needs a prototype, or if he needs to keep it himself, if repeated molds are needed.

The standard time for making a form to order is up to 10-12 working days (Saturday and Sunday are holidays). But depending on the production load, the terms may be accelerated.

 

*3D-vizualization and finished product from the mold