Silicone mold for a pillar candle Classic 30 cm formwork of our own production is made of silicone of European quality.

The mold is made of flexible silicone, which allows you to easily remove the finished candle from the mold. It has one notch for better access. There is a mark on the mold where to pull the wick, i.e. for its centering.

The form is sold complete with formwork. To make the filling, open the formwork and place it on the table. Insert the mold with a stretched wick into it so that the notch of the mold is in contact with the place of closing the formwork, put on the rubber bands. Thus, the formwork will press the mold so that the wax does not leak out.

Dimensions of the finished product:

- the weight of the finished candle is 60 g;
- height 300 mm;
- the diameter of the leg is from 18 mm to 21 mm
- leg height 20 mm
- the diameter of the tip is 10 mm

Also in our assortment you will find silicone molds for classic pillar candles with a height of 22 cm and 25 cm.